Tag: lemon lime twist

Innovation Station | Washi, Washi, Washi

Hello, crafty peeps and welcome to another Innovation Station post, a monthly feature focusing innovative tips and tricks. Each month I share an innovation that I find myself going to again and again.

This month’s innovation is washi tape. I seriously need a 12-step program for my washi tape addiction! Thin, thick, glittery, transparent, opaque … I LOVE washi! There are some wonderful tapes on the market today and some of my favorites are from SU! I especially like the face that SU coordinates their washi in complimentary color families. Today I’m going to share two of my favorite washi techniques: the washi die cut and the washi background. Both are super simple, yet add so much to your card making!

Washi is super thin which when layered over card stock makes it perfect for die cutting and background techniques. When I sat about choosing suites for this month’s cards, I knew what I wanted to use for each technique, but beyond the washi element, I wasn’t sure what the cards were going to look like. I almost scrapped both cards because I wasn’t happy with how either was coming together. Does this ever happen to you? Fortunately, inspiration struck and I am pretty happy with the way both cards turned out.

  

For the washi background card, I used the Delightful Daisy suite. I love this suite! From the stamps, to the DSP, to that great daisy punch … it’s one of my favorite suites in the annual catalog. I knew I wanted to “knock out” the daisy image (sort of the reverse of what might be expected) and have the washi showing through. In some of the photos you will see a version with two daisies that ended up getting scrapped (it was way too busy) in favor of the final card. I began with a Pool Party A2 card base. Using a corner rounder I rounded the upper left and lower right corners of both the card base and the Whisper White panel (4″ x 5.25″). I cut out a daisy in the upper middle of the panel using the Daisy Punch and added two leaves using the companion two-step stamps.

  

I cut a 2.75″ x 2.75″ piece of Whisper White and using the new Basics Pack 3 washi tape, added rows until the entire piece was covered. Using my bone folder, I burnished the washi down and using adhered it behind the daisy opening with Fast Fuse. I put one of the new clear Faceted Gems n the center of the daisy. Next, I cut a 4″ x 1.75″ piece of DSP from the Delightful Daisy DSP and a 3.73″ x 1.5″ piece of Whisper White, on which I stamped “Thank You” in Night of Navy ink. I rounded the corners of the white piece and adhered it to the DSP, which then was adhered to the main white panel. Inside I stamped “…for your kindness.” in Night of Navy ink. HINT: I could have applied the washi directly to the card base, but since washi is semi-transparent I didn’t want it to show the card base color so I opted for a Whisper White panel instead.

For the die cut washi card, I wanted to use the new “Happy Birthday” die, the coordinating stamp set, and especially the Foil Frenzy specialty DSP. I am in love with this kraft card stock foil paper! It is so beautiful and screams happy birthday! The process for die cutting washi is very simple. Begin with a piece of card stock large enough to accommodate your die and apply washi. Place this piece washi side up on your cutting matte and put the die face down over it. Add the other plate and run it through your Big Shot. Voila, you have die cut washi!

  

For this card I began with an A2 card base in Berry Burst. Using the largest solid layering oval, I cut a window out of the front of the card. In this opening I adhered a piece of polka dot foil frenzy card stock. I also cut the happy birthday out of a piece of Basic Black card stock. I glued the washi die cut to this black piece slightly offset to create a shadow. Once that was dry, I popped it up using the new mini dimensionals, cutting them in half to make sure they didn’t show. Using VersaMark ink and white embossing powder I added the sentiment “it’s your day” to the front of the card below the oval. For the finishing touch, I added a few flat backed gems by Little Things from Lucy’s Cards.

Thanks for hanging out with me, and learning (or relearning) a fun innovation! Join me next month for another of my go to innovations, watercolor backgrounds. Until next time, remember, creativity and imperfection live together in all we do. “Grace is the face love wears when it meets imperfection.”

~xoxo

Supplies Used:
Washi: Basics Pack 1 (144221) & Pack 3 (144223)
Happy Birthday Gorgeous Bundle (145301)
Foil Frenzy Specialty DSP (144125)
Daisy Delight Bundle (145361) & Delightful Daisy DSP (144137)
Card Stock: Pool Party, Berry Burst, Whisper White & Basic Black
Ink: Night of Navy, Lemon Lime Twist, Old Olive & VersaMark
Extras: Clear Faceted Gems (144142) & Flat Backed Gems

Innovation Station | Don’t Lose Your Marbles

Hello my crafty peeps and welcome to another Innovation Station post, a monthly feature focusing innovative tips and tricks. Each month I share an innovation that I find myself going to again and again.

This month’s innovation is the rolling marbles technique. This technique reminds me of a Jackson Pollock splatter painting and it’s so simple and fun. Honestly, I’d sort of forgotten about this technique (I used to use it all the time) until a friend demoed it at an event recently. I came home after and began searching for my marbles (literally, not figuratively). Once I’d found them I began playing and couldn’t really seem to stop.

  

One of the things my friend, Jennifer Blomquist, demoed was using a container (a half wood mount stamp case from Stampin’ Up!) to create this background. I always did this technique in a box and it was messy and sometimes uneven. Needless to say, I thought the stamp case idea was brilliant. The half wood mount case will work for smaller pieces (max size in this case is 3 1/4″ x 4 3/4″), but often I want to do a larger piece so I decided to try using the full wood mount stamp case from Stampin’ Up!, and it was perfect for the larger pieces (max size in this case is 4 3/4″ x 7″). HINT: marble to reinker ratios … half size case between 5 & 7 marbles and 2 — 3 drops of reinker, in the full size case between 9 & 11 marbles and 4 — 6 drops of reinker.

For my first card I wanted to use the new host set, Tranquil Tulips. I love this set! It is both a layering set as well as a mixed media style set, meaning the images aren’t designed to stamp solid, they have a dreamy quality to them. I began with a Mint Macaron A2 card base and cut a matte panel out of Powder Pink (4″ x 5 1/4″) that I mounted to the card base.

  

Next, I cut the marble panel out of Whisper White (3 7/8″ x 5 1/8″) and marbled it using a full wide stamp case, 9 marbles, and about 6 drops of Mint Macaron reinker. I put the marbles in the case and then the reinker drops in the middle. I closed the case and moved the marbles around until they were covered in reinker and there weren’t any big drops of reinker remaining. Next, I opened the case and secured the Whisper White panel to the lid using some low tac painters tape. Close the case and flip it over so the panel is now on the bottom with the marbles on top. Begin moving the marbles around the case until you are satisfied with the coverage. HINT: You can add additional reinker if needed by flipping the case back over (so the panel is on top and the marbles on the bottom). Once that was done I ran the it through my BigShot with the border from the Card Front Builder dies.

  

I also the tulip panel is 3 3/4″ x 4 1/4″ and the Powder Pink matte is 3 7/8″ x 4 3/8″. I stamped the tulips, stems, and leaves using Powder Pink, Lemon Lime Twist, and Smokey Gray. HINT: I stamped the stems first, followed by the tulips and finally the leaves. You could also stamp the tulips first, but for optimal placement on the panel, I preferred stamping the stems first. Once dry, I covered the tulips in clear Wink of Stella for a bit of shimmer and shine. I custom dyed some seam binding ribbon using Mint Macaron and Powder Pink reinkers. As I began layering all the pieces together I felt something was missing and decided it needed a sentiment, but I was stuck on where and what. As I looked over some of my sentiment sets, I came across the new bundle, Tabs for Everything, and knew just what I needed! Using the coordinating punch, I punched a tab out of Lemon Lime Twist card stock. Next, I stamped “hello you” on a piece of Whisper White card stock and punched it out using a hole punch. I stamped the scalloped frame from the stamp set onto the tab and mounted the circle using a mini glue dot. I tucked this between the tulip panel and the Powder Pink matte. I think it pulls the card together nicely!

For my second card I wanted to use another marbled background I’d created using Pacific Point so I turned to the Birthday Delivery bundle since Pacific Point is one of the coordinating colors for this suite. I love giving special birthday cards to friends and I knew this would be the perfect card for a friend who loves foxes. I was very excited when I realized that in addition to matching the stamps, the dies cut elements from the coordinating DSP. I also like that there are stamps curved to fit inside the flag banner that the fox holds. There are a bunch of amazing embellishments in this suite, including pop-up honeycomb balloons. I knew the card needed one of these inside and that is how the poodle (I call her Lola) came to be hanging out inside!

  

I began with an Old Olive A2 card base and I stamped the present randomly in Old Olive in for a tone-on-tone effect. I die cut the fox and banner from the DSP and also cut the following strips: striped DSP (1 1/4″ x 4 1/4″), Pacific Point marbled card stock (1″ x 4 1/4″), and Pacific Point card stock (3/4″ x 4 1/4″) onto which I stamped the sentiment, “Let’s Celebrate Your Day,” and layered all three pieces together with snail. Using the dies, I cut Lola and two balloons from the DSP and stamped the balloon strings on the left inside panel, positioning them so they looked like she had them in her mouth. The honeycomb balloon has adhesive, making placement a breeze! HINT: For perfect honeycomb placement, place it last and follow these steps: expose one side of the adhesive and place it flush with your center score line then you can expose the left side and simply close the card for the proper placement every time! I finished it off with the “SURPRISE” sentiment and some thin strips of DSP.

Thanks for hanging out with me, and learning (or relearning) a fun innovation! Join me next month for another of my go to innovations, washi techniques. Until next time, remember, creativity and imperfection live together in all we do. “Grace is the face love wears when it meets imperfection.”

~xoxo

Supplies Used:
Full Wide Stamp Case (127551) & Half Wide Stamp Case (127552)
Reinker: Mint Macaron, Pacific Point, & Powder Pink
Card Stock: Mint Macaron, Powder Pink, Lemon Lime Twist, Old Olive, Pacific Point, & Whisper White
Birthday Memories DSP (144118), Balloon Honeycomb (144124), & Glass Marbles
Stamps & Dies: Tranquil Tulips (143767) & Card Front Builder (144674)
Bundles: Tabs for Everything (145364) & Birthday Delivery Bundle (145294)

Innovation Station | Inlaid Die Cutting

Hello my crafty peeps and welcome to another Innovation Station post! This is a monthly feature, focusing innovative tips and tricks. During the 2nd week of each month I plan to share an innovation that I find myself going to again and again.

This month’s innovation is inlaid die cutting. Inlaid die cutting is the process by which you place the negative space pieces back into the die cut creating a one layer background. This technique works well with background dies, but it also works with shapes and words. Inlaid die cutting adds color and interest to full panel die cuts and allows you to create many different looks. Inlaid die cutting is pretty straightforward, which is what makes it such a wonderful card making staple. Basically you run the item through your die cut machine over and over, using different card stock and/or pattern papers. It’s really that simple. I have come up with a few tips that I find helpful, which I share at the end of this post.

Now onto the cards. For the first card I used the Hello cover plate from Poppy Stamps. I started with a top folding card base and I die cut the plate into the card face. I set those letters and inserts (the inside of the O’s and E’s) aside. Next, I die cut the plate from several pieces of card stock in the new InColors (lemon lime twist, tranquil tide, powder pink, berry burst, and fresh fig) and I cut a slightly smaller backing for the card front, which I turned into a sticker by adhering it to a piece of Stick It! adhesive and placed it behind the card face. Finally, I began inlaying letters, making sure to include the white inserts for the O’s and E’s. For the finishing touch, I added two silver enamel hearts to one of the O’s.

  

For my second card I die cut Winnie & Walter’s Multifaceted cover plate out of a piece of Emerald Envy card stock and also out of a piece of the Pick a Pattern DSP. Using Stick It! adhesive, I turned the Emerald Envy die cut into a sticker and adhered it to a Flirty Flamingo card base. Next, I began placing all the shapes from the DSP using the outline version to help me figure out which pieces went where. I stamped the label frame in Emerald Envy and the sentiment in Flirty Flamingo and colored in the letters using a Flirty Flamingo marker. Using my Flirty Flamingo reinker, I dyed a piece of white seam binding and also punched out the frame using the new Pretty Label punch and popped it up on dimensionals over the ribbon.

    

I took a friend to the airport at 4am this morning and I was leaving the house when I remembered another style of inlaid die cut I had planned to show: using smaller dies to create a background. The wheels were turning (both my car’s and my brain’s) and by the time I returned from the airport this card was almost completely designed! Bonus! I created it using the Frozen Treats dies and it shows how creative you can get with inlaid die cutting. HINT: To get a seamless one layer cut for the ice cream cone follow these steps. Cut the cone out of the white panel first and then overlap the ice cream die so it looks like one clean cut (see below left). Next, place the panel back on the BigShot’s magnetic platform, inserting the proper cone in its spot and placing the ice cream die in position in the hole left by the first time you die cut it. Run that through the machine again and voila, the cone and ice cream meet up and look seamless. I finished off the card with one of the sentiments from the Cool Treats stamp set cut out using the Layering Ovals.

  

TIPS & TRICKS: A few things I’ve learned along the way… If the die has a lot of pieces I often adhere my frame to a piece of Stick It adhesive sheet so that thin, edge to edge adhesive is showing through the negative spaces where I will put the die cuts in. I love Stick It! because it’s double sided adhesive so you can glue your panel to the card front and the negative spaces also have adhesive! When I do use glue I tend toward Multi Matte Medium or SU! Fine Tip Glue Pen as both provide pinpoint application, dry clear and give a strong bond. I will sometimes die cut something out of a lot of different colors and patterns and save them up for future cards. I will often store these die cuts in the pocket with the dies. With intricate full panels I will often us the version I cut out of DSP to help me figure out where all the little pieces go. The best thing about inlaid die cutting is that you can dress them up with a sentiment, but visually they are interesting enough to carry the card without needing much more.

Thanks for hanging out with me, and learning (or relearning) about inlaid die cutting! Join me next month for another of my go to innovations, marble backgrounds. Until next time, remember, creativity and imperfection live together in all we do. “Grace is the face love wears when it meets imperfection.”

~xoxo

Supplies Used:
Dies: Winnie & Walter Multifaceted, Poppy Stamps Hello, Frozen Treats (142756), & Layering Ovals
Card Stock: Whisper White, Emerald Envy, Flirty Flamingo, Lemon Lime Twist, Tranquil Tide, Fresh Fig, Powder Pink & Berry Burst
Designer Series Paper: Pick a Pattern (144163) & Cool Treats
Stamps: Pieces & Patterns (143843) & Label Me Pretty (143861)
Inks & Markers: Emerald Envy & Flirty Flamingo
Extras: Metallic Enamel Shapes (141678), Stick It!, Tweezers, Pretty Label Punch (143715) & Seam Binding

Fun-n-Crafty | Let’s “Lemon Lime” Twist Again

Hello my crafty peeps! I’m happy to be here again this month as part of the Fun & Crafty blog hop. This month we are highlighting the new 2017-19 In Colors from Stampin’ Up. I am always amazed at how well the new colors weave into the existing palette as well as coordinating with one another. These new In Colors are no exception. I decided to focus on my favorite of the five new, Lemon Lime Twist. This color is a light and vibrant green that works well with many other colors including these: Pool Party, Island Indigo, and Melon Mambo. To see the full range of In Color combinations for all the new In Colors, please click here. Today I am presenting two original cards. 

For the first card I began with a Whisper White A2 card base. Next, I ran the Split Chevron cover plate from My Favorite Things through my Big Shot three times: once in Lemon Lime Twist card stock and two times out of Lemon Lime Twist Fresh Florals DSP. I love inlaid die cutting and decided to fill up the Chevron pieces using these three colors and letting the Whisper White show through in some spots. For the finishing touch I wanted to add a die cut sentiment in Pacific Point card stock but realized I didn’t have any on hand. Fortunately, I have the ink pad and using a dauber, I was able to turn Whisper White card stock into Pacific Point card stock. Because the background is inlaid (essentially one layer) I decided to add some dimension for the sentiment so I die cut it three times (twice in white). I glued these together with the inked one on top and, ‘Voila!’, dimension.

  

For the second card I began with an A2 Whisper White card base. I added a Lemon Lime Twist mat (4″ x 5.25″) and then cut Fresh Florals DSP strips in various sizes. I glued the DSP strips down to the mat leaving a place for the sentiment. Using my MISTI I was able to stamp the whole sentiment at once, making sure it was well positioned within the allotted space. There are several great hostess sets, and Dare to Dream is one at the top of my list.

  

BONUS: over the past month and a half we (the Fun-N-Crafty team) have been playing with the new SU products. Below are two cards I made at recent events, one from a shoe box swap with my SU team (card by Kathy) and the other from a catalog party I helped a fellow team member with (card by Nicole). Both cards feature Lemon Lime Twist along with Berry Burst.

  

There is a ton of inspiration throughout this hop. Since you started here, I encourage you to grab a cup of tea and visit the other talented team members listed below to leave them some blog love! Next up is the talented Pamela over at Stinky Tofu. Until next time, remember, creativity and imperfection live together in all we do. “Grace is the face love wears when it meets imperfection.”

~xoxo

  

  1. Christine – Artful Musings (you are here)
  2. Pamela – Stinky Tofu
  3. Kathy – Stampablog
  4. Merit – MB Squared Designs
  5. Susan – Stampin’ By the SF Bay
  6. Jennifer – NW Stamper

Supplies Used:
Card Stock: Whisper White, Lemon Lime Twist, Berry Burst, Chocolate Chip, & Kraft
Ink: Lemon Lime Twist (144086), Berry Burst (144083), & Pacific Point (126951)
Stamps: Thankful Thoughts (141522), Dare to Dream (143769), & Colorful Seasons (143726)
Dies: Seasonal Layers (143751) & Sunshine Wishes (141489)
Punches: Banner Punch (138292) & Pretty Label Punch (143715)
Paper: Fresh Florals DSP (144131), Vellum (101856), & Metallic Doilies (138392)
Embellishments: Bitty Bows (144217) & Silver Thread (138402)
Extras: Paper Trimmer, Score Board, Adhesive, Big Shot, Sponges/Daubers & Scissors

Innovation Station | White Washed

Hello my crafty peeps and welcome to another Innovation Station post! This is a monthly feature focusing innovative tips and tricks. During the 2nd week of each month I plan to share an innovation that I find myself going to again and again.

This month’s innovation is white washing as a coloring technique. White washing is just what you might think, it’s the process of coloring an image with white chalk ink using a water brush and then using markers (Distress, Stampin’ Write, or ZIG Clean Color) or ink pads to add color over the top of the “whitewash”.

  

You start off by rubbing your embossing buddy over your card stock and then stamping your image in VersaMark ink. Pour white embossing powder over your image and then heat set. HINT: Let your heat tool heat up for 8-10 seconds before putting it over your image and the embossing powder will melt faster and cause less paper warping. Once the embossing powder is cooled you can begin white washing a layer of craft white over the image using a water brush and ink in the lid of your stamp pad. Never put your water brush directly onto the stamp pad.

  

Once the white washed layer is dry you can begin adding color using ink in the lid of your stamp pad and a water brush. I typically lay dark color in the corners and then using the water brush pull it through the space. Once you are satisfied and it is dry you can use a damp cloth to wipe the ink off the embossed areas. Typically this technique is done on kraft card stock, but I’ve also had fun results on gray so I’m showing that as well. Here are flowers, two on kraft and two on basic gray card stock. Both sets use Calypso Coral and Lemon Lime Twist over the Craft white. The colors look different over the gray versus the kraft, don’t they? Lastly, I will sometimes add some clear Wink of Stella over the image for that little bit of shine.

  

Open stamps work best for this technique and it is perfect when paired with floral images because it adds a dreamy quality to them, but it will work with any stamp with large open spaces.

  

Thanks for hanging out with me, and learning (or relearning) a fun innovation! Join me next month for another go to innovation, inlaid die cutting. Until next time, remember, creativity and imperfection live together in all we do. “Grace is the face love wears when it meets imperfection.”

~xoxo

Supplies Used:
Stamps: Thinking Of You, Beautiful Bunch, & Butterfly Basics
Ink: Versa Mark, Calypso Coral, Lemon Lime Twist, & Berry Burst
Embossing Powder: White
Tools: Water Brush, Heat Tool, Embossing Buddy
Card Stock: Kraft & Basic Gray

Innovation Station | Custom Dyed Ribbon

Hello my crafty peeps and welcome to my first Innovation Station post! This is a new monthly feature, focusing innovative tips and tricks. During the 2nd week of each month I plan to share an innovation that I find myself going to again and again.

I’ve been “innovating” since I bought my first stamp at The Stamp Cabana in Winter Park, FL back in 1997. Over the years I’ve seen things come and go and come back again! In all this time, I’ve found myself going “back to the well” for techniques that never seem to get old.

There’s nothing worse than finishing a card only to realize it’s missing something! Often I find what’s missing is a textile and my go to textile is ribbon. Many times I can get by with an off the rack neutral ribbon (black, brown, gold, silver), but there are times when I think, “If only I had a color-matched ribbon, all would be right in the universe!”, which brings me to this month’s innovation: custom dyed ribbon.

My go to ribbon for this innovation: seam binding. It’s cheap, readily available, and holds up well, but you could use any ribbon for this process. You can use many things to dye ribbon (Color Burst powders, Distress stains and sprays, or Perfect Pearls) but my favorite for custom color matching is reinkers or ink pads. Here is what you need:

White Ribbon or Seam Binding
Craft Mat
Reinkers
Ink Pads
Water bottle
Heat Tool
Baby Wipes
Craft Scrubbie
Ribbon Iron (optional)
Gloves (optional, if you don’t like inky fingers)

 

 

Custom dying ribbon is a very simple process. First, cut the length of ribbon you need for your project. Next, place a few drops of reinker, or smear the ink pad, onto your craft sheet. I start with 2 drops of reinker (you can always add more if needed). Add water to the ink. 

  

  

Using the ribbon, soak up the liquid, making sure the entire ribbon is saturated. If needed, you can also spray water onto the ribbon. After the ribbon is completely covered you can add more ink if you want a deeper color.

Once you are happy with the color, dry the ribbon with your heat tool (if you have time you can let it air dry). Sometimes I scrunch it up so it looks “ruched” and other times I dry it flat and run it through my ribbon iron. I hold it in my hand, moving it around until it’s completely dry and volià, custom dyed ribbon, a perfect finishing touch for any card or scrapbook layout.

  

By the time you are done dying ribbon your fingers are quite inky (left hand) so it’s the Craft Scrubbie to the rescue (right hand). Inky fingers don’t stand a chance when you have the Ranger Craft Scrubbie.

Thanks for hanging out with me, and learning (or relearning) a fun innovation! Join me next month for another of my go to innovations, white washing. Until next time, remember, creativity and imperfection live together in all we do. “Grace is the face love wears when it meets imperfection.”

~xoxo

Supplies Used:
Inks: Berry Blast, Fresh Fig, Lemon Lime Twist, Powder Pink, & Tranquil Tide
Ribbon: Hug Snug Winter White Seam Binding
Ranger Craft Scrubbie
Ranger Craft Mat
Distress Water Bottle

Fun & Crafty | Mom’s Are Golden

Hello my crafty peeps! I’m happy to be here again this month as part of the Fun & Crafty blog hop. This month’s theme is Mother’s Day. A day to honor that woman who taught you right from wrong, wiped every tear, and kissed every boo-boo! She stands firm and steady as a rock for her kids as they venture farther and farther from home, always knowing they have a safe place to return. Mom’s are golden.

My Mom is gone, having passed almost 7 years ago. So is my Gran, who is really the woman I think of as my Mom since she raised me. I have so many wonderful memories of times with my Gran that though she isn’t here with me, I feel her presence and remember the lessons and life truths she taught me. She was feisty, loyal, fierce when crossed, generous, and independent. She instilled in me a drive to be self-sufficient, to obtain all the education I could, and to never give up on my dreams. I miss her but honor her each day. Owing to the fact that both of my “Mom’s” are gone, I never really invested in any “Happy Mother’s Day” stamps so when this month’s theme was announced I was at a loss as to what to do … enter the new Eastern Palace suite from Stampin’ Up! I am always looking for alternate uses for the stamp sentiments I have and was pleased to find that the sentiments in this set are versatile, but more on that in a minute.

When I first saw the suite I didn’t immediately fall in love. Actually, it was quite the opposite, I really didn’t like it very much but I challenged myself to order one of the bundles and work with it during the month of April. Little did I know when I set this challenge it would turn out to help me create this month’s Mother’s Day card and help me fall a little in love with the Eastern Palace suite. The suite features three new In Colors, Tranquil Tide, Fresh Fig, and my favorite, Lemon Lime Twist. It features mandala imagery, some interesting dies, and wonderful embellishments. The DSP showcases geometric shapes and adds in Dapper Denim to the other colors. It’s opulent and rich. In May, everyone will have a chance to purchase one of two bundles (premier or starter) before the new catalog goes live.

         

For my card I used a piece of Tranquil Tide card stock cut to A2 size (4.25″ x 5.5″). The DSP was cut to 4″ x 5.25″, and I also used a 3″ piece of the Fresh Fig card stock behind the DSP. First, I cut out the flower mandala shape using the matching thinlit die. This die is unique in that it doesn’t cut out the outer shape, but instead cuts out the “petals”, which you can lift up, adding dimension to your card. I decided I also wanted to split the DSP so that I could insert a piece of Fresh Fig card stock behind and create some interest in my card. I used one of the layering circle dies to cut out a badge for the center of the mandala die cut and used one of the circle stamps and a sentiment (to think of you is to smile) from the Eastern Palace stamp set. I stamped the circle in Fresh Fig and the sentiment in Tranquil Tide on Whisper White card stock. While not overtly “Mother’s day” this sentiment reminded me that whenever I remember my Gran I always smile, which seemed perfect. Because the card base is so dark I also inserted a 4″ x 5.25″ Whisper White panel inside and stamped one of the smaller images from the Eastern Palace suite to tie in the Lemon Lime Twist ink. The finishing touch, a rhinestone on the circle for that little pop of bling!

         

There is a ton of inspiration throughout this hop. Since you started here, I encourage you to grab a cup of coffee and visit the other talented team members listed below to leave them some blog love! Next up is the talented Pamela over at Stinky Tofu. Until next time, remember, creativity and imperfection live together in all we do. “Grace is the face love wears when it meets imperfection.”

~xoxo
Beanie

 

  1. Christine – Artful Musings (you are here)
  2. Pamela – Stinky Tofu
  3. Kathy – Stamp-A-Blog
  4. Susan – Stampin’ by the SF Bay
  5. Stacey – A Work of Carte
  6. Jennifer – Northwest Stamper

Supplies Used:
Eastern Palace Premier Bundle
Inks: Lemon Lime Twist, Fresh Fig, & Tranquil Tide
Paper: Eastern Palace DSP
Card Stock: Tranquil Tide, Fresh Fig, & Whisper White
Rhinestones